cutting mild steel chain
We know most people who protect their asset with a chain and padlock use thin 4mm or 6mm diameter mild steel chain to secure
because its cheap
security is only as strong
as its weakest point
mild steel chain
is the weakest point
There was no point designing a unique security device in 2003, Padlock Protection to stop the three methods opportunistic, smash and grab and semi professional thieves use to break a padlock or cut the chain, they are
Then use 4mm or 6mm diameter mild steel chain that is easy and quick to cut with a cheap 12 inch bolt cutter a thief can buy at Bunnings, Mitre 10 or the local hardware shop for about five dollars.
you replace it with
If you believe the padlock you own is secure and you are using 4mm or 6mm diameter mild steel chain you should replace it with 10mm diameter high tensile chain.
Cannot be cut with a bolt cutter no matter how long the bolt cutter is, the common tool used to cut a link in mild steel chain or cut the padlocks shackle.
Australian/NZ standard A/NZS 4344:2001
To protect 10mm diameter high tensile chain from climatic conditions it is zinc plated with a gold passovated finish.
the padlock you own with the
10mm diameter high tensile chain
ensures your asset is
virtually theft proof
Padlock Guard designed to protect most padlocks with a 40mm - 50mm wide body and a shackle diameter between 7mm - 11mm up to 25mm high.
this represents about 80%
of all padlocks purchased
purchase any length
up to 5m long
The Australian made Padlock Guard is guaranteed by the Australian manufacturer for 10 year.
June 28, 2022
the Australian manufacturer
will guarantee it until
June 28, 2032
Tuesday June 28, 2022
copyright © 1982 – 2022